The C700 variant of the 0760 rig was developed for washing the RTM322 engine in the EH101 Merlin helicopter and is fitted with the accessory 3 engine wash kit, JMP/RTM322/D/6199.

INTRODUCTION
The 22 (2 x 11) gallon engine compressor wash rig, Part No. JMP/EH/D/0760/C700, consists of two stainless steel pressure vessels, each having a capacity of 55.69 litres (12.25 gal). Each vessel is equipped with a sight glass indicating the level of fluid, a filler cap, gauze strainer, pressure relief valve, nitrogen inlet valve, fluid outlet valve and drain valve.

GENERAL
The maximum working pressure of each vessel is 2.07 bar (30 psi). The vessels are mounted in tandem within a welded, tubular steel frame which forms a transportation trolley. Two liquid urethane filled rubber tyred wheels run on a solid axle which is welded to the frame. The rear of the frame is supported by two rubber tyred swivel castor wheels.

OPTIONAL 3-WAY ENGINE WASH REEL ASSEMBLY
The optional three-way engine wash reel assembly kit (JMP/RTM322/D/6199) enables simultaneous connection and operation of three fluid delivery hoses and is attached to the rig on the opposite side to the standard single delivery hose reel.