Juniper Liverpool
  • Home
  • About Us
  • Products
  • Wash Probes / Tooling
  • News & Media
    • News
    • Newsletters
    • Videos
  • Contact
    • Contact
    • Customer List

High Capacity Trailer Unit

Home News & Media High Capacity Trailer Unit

As with the smaller trailer developed for BA City Flyer (see news item 21/22 March 2014), Jet2 wanted various items of Juniper equipment and needed the facility to transport this equipment easily between sites. Jet2 had ordered our larger 2×25 gallon compressor wash rig together with a Kyoto containment mat, vacuum unit and a selection of engine wash probes, and it was decided a purpose built trailer would also be the ideal solution in this case. However, due to the higher capacity wash rig being needed, a larger trailer would be required.

The trailer was designed and adapted with floor and wall mounted anchor points for secure equipment stowage. A motorised winch was also fitted to help with loading and unloading the heavier 2×25 gallon wash rig (the addition of a winch meant that the rig could be loaded with full tanks in case a water supply wasn’t available at the wash site).

A further advantage of the larger trailer was that we also had room to include our static filtration unit, which meant that the waste water from any engine wash could be collected, filtered and safely disposed of at a convenient time.

The completed trailer was delivered to Jet2 at Manchester International Airport where staff were given training in the correct way to load and unload the equipment before the unit was commissioned with a wash on the no.2 engine of a Jet2 Boeing 737-400.

Using the CFM56-3 wash probes, and with the Kyoto containment mat in position, a successful wash was completed. The waste water was then collected using the vacuum unit and filtered into plastic drums to assess the filter’s effectiveness. Everyone present was enthusiastic about the results and impressed with how well the Juniper equipment did it’s job.

The High Capacity trailer Unit (JMP/CWTU/D/7031) comprises of:

• 14′ (long) x 6′ (wide) x 7′ (high) double axle box van trailer
• 2×25 gallon compressor washing rig (JMP/CFM56/D/4777/C200)
• Battery powered vacuum unit (SM939)
• 12′ x 35′ Kyoto containment mat (SM895/02)
• 6 x 10kg mat weights (JMP/KYOTO/C/6818)
• Waste water filtration unit (JMP/FILT/D/6891)
• CFM56-3 engine probes (JMP/CFM56/D/4538)
• CFM56-7 long engine probes with storage case (JMP/CF34/D/6932)
• RB211-535E4 long engine probes (JMP/RB211/D/6984)

If you would like more details of this trailer unit please contact us.

The fully loaded trailer

The trailer is unloaded and the equipment is moved into position

The mat is in position under the engine, ready for the wash to start

The vacuum unit is used to recover the waste water ready for filtration

Posted on Wednesday, May 21st, 2014 at 11:27 am in Latest News.

Archives

  • July 2020
  • June 2019
  • December 2018
  • October 2017
  • May 2014
  • March 2014
  • August 2013
  • May 2013
  • January 2013
  • September 2012
  • August 2012
  • March 2012
  • June 2011
  • July 2010
  • February 2010
  • November 2009
  • September 2009
  • July 2009
  • October 2008
  • May 2008
  • February 2008
  • November 2007
  • July 2007
  • June 2007

Categories

  • Latest News

Recent Posts

  • Large Trailer Unit supplied to Titan Airways
  • Handy maintenance tips for your wash rig.
  • Replacement probe part kits
  • Card Payments now accepted
  • Foam walled containment mat now available

A.T JUNIPER (LIVERPOOL) LTD

Marshall Works
11A Prenton Way
North Cheshire Trading Estate
Prenton, Wirral
CH43 3DU
England

Tel: 0151 733 1553

 

A.T Juniper

© 2018 A.T Juniper (Liverpool) Limited. All Rights Reserved.
Website by Maxweb Solutions

Contractor Cage Code U2066

iso

Current Time GMT:

PDT EDT JST